Replacing The Current Sensor; Removing The Current Sensor - Siemens SINAMICS G120XA Operating Instructions Manual

10.2.4.3

Replacing the current sensor

Precondition
The converter power supply is switched off.
Required tools
Torque wrench for the following screws:
● Hexagon 10 mm
● Hexagon 19 mm
● TX-20
● TX-25
● TX-30
Function description

Removing the current sensor

1. Remove 2 screws (TX-25) of the front cover.
2. Remove the front cover.
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Corrective maintenance
10.2 Replacing spare parts
845