Preparing For Commissioning; Collecting Motor Data; Data For A Standard Induction Motor; Which Motor Is Connected To The Converter? - Siemens SINAMICS G120XA Operating Instructions Manual

5.3

Preparing for commissioning

5.3.1

Collecting motor data

Data for a standard induction motor

Before starting commissioning, you must know the following data:
● Which motor is connected to the converter?
Note down the Article No. of the motor and the motor's nameplate data.
If available, note down the motor code on the motor's nameplate.
Figure 5-1
● How is the motor connected?
Pay attention to the connection of the motor (star connection [Y] or delta connection [Δ]).
Note the appropriate motor data for connecting.
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Example of the rating plate for a standard induction motor
Commissioning
5.3 Preparing for commissioning
105