Table of Contents
Advertisement
12
Dependency:
The setpoint for the input signals is specified using p0796.
See also: p0796
Note
This parameter is not saved when data is backed up (p0971).
AI: Analog Input
DI: Digital Input
p0796
CU digital inputs simulation mode setpoint / CU DI simul setp
Access level: 3
Can be changed: T, U
Unit group: -
Min:
-
Description:
Sets the setpoint for the input signals in the digital input simulation mode.
Bit field:
Bit
00
01
02
03
04
05
11
12
Dependency:
The simulation of a digital input is selected using p0795.
See also: p0795
Note
This parameter is not saved when data is backed up (p0971).
AI: Analog Input
DI: Digital Input
p0797[0...3]
CU analog inputs simulation mode / CU AI sim_mode
Access level: 3
Can be changed: T, U
Unit group: -
Min:
0
Description:
Sets the simulation mode for the analog inputs.
Value:
0:
1:
Index:
[0] = AI0 (X131 3/4)
[1] = AI1 (X131 10/11)
[2] = Reserved
[3] = Reserved)
Dependency:
The setpoint for the input voltage is specified via p0798.
See also: p0798
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
DI 12 (X131.10, 11) AI 1
Signal name
DI 0 (X133. 5)
DI 1 (X133. 6)
DI 2 (X133. 7)
DI 3 (X133. 8)
DI 4 (X133. 16)
DI 5 (X133. 17)
DI 11 (X131. 3, 4) AI 0
DI 12 (X131.10, 11) AI 1
Terminal evaluation for analog input x
Simulation for analog input x
Simulation
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Simulation
Simulation
Simulation
Simulation
Simulation
Simulation
Simulation
Simulation
Calculated: -
Scaling: -
Unit selection: -
Max:
1
Parameters
7.3 Parameters
Terminal eval
-
Data type: Unsigned32
Dynamic index: -
Function diagram: 2201, 2221,
2256
Factory setting:
0000 0000 0000 0000 bin
0 signal
FP
Terminal eval
-
Terminal eval
-
Terminal eval
-
Terminal eval
-
Terminal eval
-
Terminal eval
-
Terminal eval
-
Terminal eval
-
Data type: Integer16
Dynamic index: -
Function diagram: -
Factory setting:
0
441
Advertisement
Table of Contents
