Saving the settings and series commissioning
8.2 Operator panel
8.2
Operator panel
8.2.1
Backup using the operator panel
Precondition
The converter power supply has been switched on.
Function description
Procedure
You have backed up the settings to the BOP-2.
❒
8.2.2
Transfer to the converter
Precondition
The converter power supply has been switched on.
732
1. In the "OPTIONS" menu, select "TO BOP".
2. Start data transfer with OK.
3. Wait until the converter has backed up the settings to the BOP‑2.
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter