Table of Contents
Advertisement
p2108[0...n]
BI: External fault 3 / External fault 3
CUG120XA_USS
Access level: 3
(PM330)
Can be changed: T, U
Unit group: -
Min:
-
Description:
Sets the signal source for external fault 3.
External fault 3 is initiated by the following AND logic operation:
- BI: p2108 negated
- BI: p3111
- BI: p3112 negated
Dependency:
See also: p3110, p3111, p3112
See also: F07862
Note
An external fault is triggered with a 1/0 signal.
r2109[0...63]
Fault time removed in milliseconds / t_flt resolved ms
Access level: 3
Can be changed: -
Unit group: -
Min:
- [ms]
Description:
Displays the system runtime in milliseconds when the fault was removed.
Dependency:
See also: r0945, r0947, r0948, r0949, r2130, r2133, r2136, p8400
NOTICE
The time comprises r2136 (days) and r2109 (milliseconds).
Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
r2110[0...63]
Alarm number / Alarm number
Access level: 2
Can be changed: -
Unit group: -
Min:
-
Description:
This parameter is identical to r2122.
p2111
Alarm counter / Alarm counter
Access level: 3
Can be changed: T, U
Unit group: -
Min:
0
Description:
Number of alarms that have occurred after the last reset.
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
- [ms]
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
65535
Parameters
7.3 Parameters
Data type: Unsigned32 / Binary
Dynamic index: CDS, p0170
Function diagram: 2546
Factory setting:
4022.1
Data type: Unsigned32
Dynamic index: -
Function diagram: 8050, 8060
Factory setting:
- [ms]
Data type: Unsigned16
Dynamic index: -
Function diagram: 8065
Factory setting:
-
Data type: Unsigned16
Dynamic index: -
Function diagram: 8050, 8065
Factory setting:
0
579
Advertisement
Table of Contents
