Table of Contents
Advertisement
Parameters
7.3 Parameters
NOTICE
The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
p1071[0...n]
CI: Main setpoint scaling / Main setp scal
Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description:
Sets the signal source for scaling the main setpoint.
r1073
CO: Main setpoint effective / Main setpoint eff
Access level: 3
Can be changed: -
Unit group: 3_1
Min:
- [rpm]
Description:
Displays the effective main setpoint.
The value shown is the main setpoint after scaling.
p1075[0...n]
CI: Supplementary setp / Suppl setp
Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description:
Sets the signal source for the supplementary setpoint.
Dependency:
See also: p1076, r1077, r1078
p1076[0...n]
CI: Supplementary setpoint scaling / Suppl setp scal
Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description:
Sets the signal source for scaling the supplementary setpoint.
r1077
CO: Supplementary setpoint effective / Suppl setpoint eff
Access level: 3
Can be changed: -
Unit group: 3_1
Min:
- [rpm]
Description:
Displays the effective supplementary setpoint. The value shown is the additional setpoint after scaling.
474
Calculated: -
Scaling: PERCENT
Unit selection: -
Max:
-
Calculated: -
Scaling: p2000
Unit selection: p0505
Max:
- [rpm]
Calculated: -
Scaling: p2000
Unit selection: -
Max:
-
Calculated: -
Scaling: PERCENT
Unit selection: -
Max:
-
Calculated: -
Scaling: p2000
Unit selection: p0505
Max:
- [rpm]
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: CDS, p0170
Function diagram: 3001, 3030
Factory setting:
1
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 3030
Factory setting:
- [rpm]
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: CDS, p0170
Function diagram: 3001, 3030
Factory setting:
0
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: CDS, p0170
Function diagram: 3001, 3030
Factory setting:
1
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 3030
Factory setting:
- [rpm]
SINAMICS G120XA converter
Advertisement
Table of Contents
