Commissioning Guidelines - Siemens SINAMICS G120XA Operating Instructions Manual

Commissioning
5.1

Commissioning guidelines

Overview
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
1. Define the requirements to be
met by the drive for your
application.
(Page 105)
2. Restore the factory settings of
the converter if necessary.
(Page 124)
3. Check if the factory setting of the
converter is sufficient for your
application.
(Page 108)
4. Set the following for quick
commissioning of the drive:
– The closed-loop motor control
– The inputs and outputs
– The fieldbus interface
(Page 110)
5. Check if additional converter
functions are required for the
application.
(Page 125)
6. If necessary, adapt the drive.
(Page 125)
7. Save your settings.
(Page 725)
5
103