Preparing The Memory Card; Example Of Memory Card Contents After The File Transfer - Siemens SINAMICS G120XA Operating Instructions Manual

Corrective maintenance
10.3 Firmware upgrade and downgrade
10.3.1

Preparing the memory card

Overview
You can load the converter firmware from the Internet to a memory card.
Precondition
You have the appropriate memory card.
Function description
Procedure
1. Download the required firmware to your PC from the Internet.
2. Extract the files to a directory of your choice on your PC.
3. Transfer the unzipped files into the root directory of the memory card.
Figure 10-3
Depending on the firmware, the filenames and the number of files may differ from the display
above.
The "USER" directory does not exist on unused memory cards. After the memory card is
plugged in for the first time, the converter creates a new "USER" directory.
You have prepared the memory card for the firmware upgrade or downgrade.
❒
854
Recommended memory cards (Page 726)
Download (https://support.industry.siemens.com/cs/ww/en/view/67364620)

Example of memory card contents after the file transfer

Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter