Cables; Cables With A High Level Of Interference; Cables With A Low Level Of Interference - Siemens SINAMICS G120XA Operating Instructions Manual

Figure 3-2
Further information
Additional information about EMC-compliant installation is available in the Internet:
60612658)
3.1.2

Cables

Cables with a high level of interference and cables with a low level of interference are
connected to the converter:
● Cables with a high level of interference:
– Cable between the line filter and converter
– Motor cable
– Cable at the converter DC link connection
● Cables with a low level of interference:
– Cable between the line and line filter
– Signal and data cables
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Grounding and high-frequency equipotential bonding measures in the control cabinet and
in the plant/system
EMC installation guideline
3.1 EMC-compliant setup of the machine or plant
(http://support.automation.siemens.com/WW/view/en/
Mounting
41