Table of Contents
Advertisement
NOTICE
Damage to the output reactor by exceeding the maximum pulse frequency
The maximum permissible pulse frequency when using the output reactor is 4 kHz. The output
reactor can be damaged if the pulse frequency is exceeded.
● When using an output reactor, the pulse frequency of the converter must not be higher than
NOTICE
Damage to the output reactor if it is not activated during commissioning
The output reactor may be damaged if it is not activated during commissioning.
● Activate the output reactor during commissioning via the parameter specified by the
● Activate the output reactor during commissioning according to the electric specifications.
Note
Output reactors are available as optional components for converters of frame sizes FSD ... FSG
and FSH/FSJ only.
Article number
Converter frame size Rated power (kW)
FSD
FSE
FSF
FSG
FSH
FSJ
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Maximum permissible motor cable length (Page 64)
4 kHz.
converter manufacturer.
18.5
22 ... 37
45
55
75 ... 90
110
132
160
200
250
315
355 ... 400
450 ... 500
560
2.6 Optional components
Output reactor
6SL3202-0AE23-8CA0
6SE6400-3TC07-5ED0
6SE6400-3TC14-5FD0
6SL3000-2BE32-1AA0
6SL3000-2BE32-6AA0
6SL3000-2BE33-2AA0
6SL3000-2BE33-8AA0
6SL3000-2BE35-0AA0
6SL3000-2AE36-1AA0
6SL3000-2AE38-4AA0
6SL3000-2AE41-0AA0
6SL3000-2AE41-4AA0
Description
33
Advertisement
Table of Contents
