How Is The Changeover Triggered?; Changeover For Activation Via A Control Command; Changeover Depending On The Speed - Siemens SINAMICS G120XA Operating Instructions Manual

Advanced commissioning
6.9 Energy saving

How is the changeover triggered?

The following options are provided to switch between converter operation and line operation:
● Changeover for activation via a control command
Figure 6-85
The converter switches the motor between converter operation and line operation
depending on the bypass control command p1266.
● Changeover depending on the speed
Figure 6-86
334
Changeover when activating via a control signal (p1267.0 = 1)
Changeover depending on the speed (p1267.1 = 1)
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter