Bi: External Alarm 3 / External Alarm 3; Change Message Type Message Number / Chng Type Msg_No; Change Message Type Type / Change Type Type - Siemens SINAMICS G120XA Operating Instructions Manual

p2117[0...n]

BI: External alarm 3 / External alarm 3

Access level: 3
Can be changed: T, U
Unit group: -
Min:
-
Description: Sets the signal source for external alarm 3.
Dependency: See also: A07852
Note
An external alarm is triggered with a 1/0 signal.
p2117[0...n] BI: External alarm 3 / External alarm 3
CUG120XA_USS Access level: 3
(PM330)
Can be changed: T, U
Unit group: -
Min:
-
Description: Sets the signal source for external alarm 3.
Dependency: See also: A07852
Note
An external alarm is triggered with a 1/0 signal.
p2118[0...19]

Change message type message number / Chng type msg_no

Access level: 3
Can be changed: T, U
Unit group: -
Min:
0
Description: Selects faults or alarms for which the message type should be changed.
Dependency: Selects the fault or alarm selection and sets the required type of message realized under the same index.
See also: p2119
Note
Re-parameterization is also possible if a message is present. The change only becomes effective after the message
has gone.
p2119[0...19]

Change message type type / Change type type

Access level: 3
Can be changed: T, U
Unit group: -
Min:
1
Description: Sets the message type for the selected fault or alarm.
Value: 1:
2:
3:
Dependency: Selects the fault or alarm selection and sets the required type of message realized under the same index.
See also: p2118
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Fault (F)
Alarm (A)
No message (N)
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
65535
Calculated: -
Scaling: -
Unit selection: -
Max:
3
Parameters
7.3 Parameters
Data type: Unsigned32 / Binary
Dynamic index: CDS, p0170
Function diagram: 2546
Factory setting:
1
Data type: Unsigned32 / Binary
Dynamic index: CDS, p0170
Function diagram: 2546
Factory setting:
4022.0
Data type: Unsigned16
Dynamic index: -
Function diagram: 8050, 8075
Factory setting:
0
Data type: Integer16
Dynamic index: -
Function diagram: 8050, 8075
Factory setting:
1
581