Mounting The Shield Connection Kit For The Power Module, Fsa ... Fsc; Mounting The Shield Connection Kit For The Power Module, Fsd ... Fsg - Siemens SINAMICS G120XA Operating Instructions Manual

Mounting
3.3 Mounting the converter

Mounting the shield connection kit for the Power Module, FSA ... FSC

Procedure
1. Remove the two screws and two U clamps from the bottom of the converter
2. Mount the two U clamps with the two screws on the shield plate
3. Fasten the shield plate in place using two screws
You have now mounted the shield connection kit.
❒

Mounting the shield connection kit for the Power Module, FSD ... FSG

Note
For converters FSD to FSG, the shield connection kit for the Power Module is not included in
the scope of delivery of the converter and only available optionally.
50
③
.
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
①
.
②
.
SINAMICS G120XA converter