Additional Information When Connecting Fsg Converters; Connections For The Line Supply And Motor - Siemens SINAMICS G120XA Operating Instructions Manual

Wiring
4.1 Line supply and motor
Figure 4-9

Connections for the line supply and motor

Additional information when connecting FSG converters

Remove the plastic insulating plate as shown below to gain better access to the terminals for
the power connections.
Damage to converter as a result of operation without insulating plates
Without the insulating plates, voltage flashovers may occur between the phases.
● Replace the insulating plates after connecting the cables.
70
WARNING
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter