Drill Patterns (Mm) - Siemens SINAMICS G120XA Operating Instructions Manual

Mounting
3.3 Mounting the converter
Frame Height Height in‐
size cluding
shield
plate
FSH 1487 -
FSJ 1438 -
The shield plates for FSD to FSG are available as options only.
1)
The cooling air clearances A and B refer to the converter without shield plate.
2)
Maximum surrounding air temperature during operation dependent on lateral clearance:
3)
- Max. 55 °C for mounting with 0 mm lateral clearance (for tolerance reasons, we recommend a lateral clearance of approx.
1 mm.)
- Max. 60 °C for mounting with 50 mm lateral clearance.

Drill patterns (mm)

Table 3-1 FSA ... FSG
Drill pattern
Note: For the converters FSD to FSG, a printed drill pattern is supplied with each converter. This can be used to easily drill the
necessary mounting holes.
48
Width Depth
1)
548 410
801 410
Dimensions FSA
A 55
B 221.5
Ø 5
Fixings (bolts, 4 × M4
washers, nuts)
Tightening torque 2.5
(Nm)
Additional depth Clearance
With oper‐ With G120 A
ator panel Smart Ac‐
cess
- - 200
- - 200
FSB FSC FSD
80 118 170
265 283 430
5 5.5 6.0
4 × M4 4 × M5 4 × M5
2.5 2.5 6
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
2)
B lateral front
200 30 100
200 30 100
FSE FSF FSG
230 270 265
509 680 970.5
6.5 8.5 12.0
4 × M6 4 × M8 4 × M10
10 25 50
SINAMICS G120XA converter