Replacing The Current Sensor - Siemens SINAMICS G120X Operating Instructions Manual

Infrastructure converter for hvac/water/wastewater

Hide thumbs Also See for SINAMICS G120X:

Table of Contents

Replacing the current sensor

Precondition

The converter power supply is switched off.

Required tools

Torque wrench for the following screws:

Function description

Removing the current sensor

1. Remove screws (TX-25) of the upper and lower terminal cover:

– FSH: 3 screws

– FSJ: 4 screws

2. Remove the terminal covers.

SINAMICS G120X converter

Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC

Corrective maintenance

10.2 Replacing spare parts