Removing The Pallet; Lifting The Converter Into The Cabinet - Siemens SINAMICS G120XA Operating Instructions Manual

Mounting
3.3 Mounting the converter
Installing

Removing the pallet

Lifting the converter into the cabinet

The electrical cabinet installation must be realized in accordance with the dimension drawings
supplied. The minimum cabinet sizes for the installation of converters FSH and FSJ are
provided as follows:
● For FSH: 800 mm (width) × 2000 mm (height) × 600 mm (depth)
● For FSJ: 1000 mm (width) × 2000 mm (height) × 600 mm (depth)
Before converter installation, remove the side, back, and top plates from the cabinet frame, and
mount at least two support plates in the cabinet.
54
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter