Number
p29594
p29595
p29596
p29597
p29598
Note: Before enabling the deragging via p29590, make sure the converter is in OFF status.
Interaction with other functions
● Deragging signal is ignored if the converter is restarted under the command of essential
service mode, bypass operation, automatic restart, hibernation mode or multi-pump
switching-in.
● Deragging is interrupted if essential service mode, bypass, or hibernation mode is activated.
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Name
Ramp-up time
Ramp-down time
Deragging forward time
Deragging reverse time
Deragging cycle
For more information about the parameters, see Chapter "Parameters (Page 349)".
Advanced commissioning
6.3 Pump control
Factory setting
5 s
5 s
5 s
5 s
1
223