Table of Contents
Advertisement
Mounting
3.3 Mounting the converter
Procedure, FSG
1. Secure each side part to the shielding plate with two screws
2. Attach the shielding plate to the bottom of the converter and fasten it in place using six
screws
3. If the converter has an integrated line filter, mount the EMC connecting bracket additionally
by fastening it to the shielding plate with four screws
You have now mounted the shield connection kit.
❒
3.3.4
Additional mounting instructions for FSD ... FSJ
3.3.4.1
Additional mounting instructions, FSD ... FSG
When mounting the converters FSD to FSG, the weight of the converter should be considered
and appropriate hoisting gear for mounting should be applied.
Converter weight:
Hoisting gear
Use crane lifting lugs and the appropriate hoisting gear when mounting the converters on the
cabinet panel.
52
②
.
Technical data dependent on the power (Page 866)
①
③
.
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
.
SINAMICS G120XA converter
Advertisement
Table of Contents
