Table of Contents
Advertisement
Parameters
7.3 Parameters
r9486
BICO interconnections signal source search first index / BICO S_src srchIdx
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the first index of the signal source being searched for.
The signal source to be searched for is set in p9484 (BICO-coded) and the search result is specified using the number
(r9485) and the first index (r9486).
Dependency:
See also: p9484, r9485
Note
The signal source to be searched is set in p9484 (BICO-coded).
The search result is contained in r9482 and r9483 and is specified by the count (r9485) and the first index (r9486).
r9925[0...99]
Firmware file incorrect / FW file incorr
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the directory and name of the file whose status as shipped from the factory was identified as impermissible.
Dependency:
See also: r9926
See also: A01016
Note
The directory and name of the file is displayed in the ASCII code.
r9926
Firmware check status / FW check status
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the status when the firmware is checked when the system is booted.
0: Firmware not yet checked.
1: Check running.
2: Check successfully completed.
3: Check indicates an error.
Dependency:
See also: r9925
See also: A01016
p11000
BI: Free tec_ctrl 0 enable / Ftec0 enab
Access level: 2
Can be changed: T, U
Unit group: -
Min:
-
Description:
Sets the signal source to switch in/switch out the free technology controller 0.
1 signal: The technology controller is switched in.
0 signal: The technology controller is switched out.
684
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Data type: Unsigned16
Dynamic index: -
Function diagram: -
Factory setting:
-
Data type: Unsigned8
Dynamic index: -
Function diagram: -
Factory setting:
-
Data type: Unsigned8
Dynamic index: -
Function diagram: -
Factory setting:
-
Data type: Unsigned32 / Binary
Dynamic index: -
Function diagram: 7030
Factory setting:
0
SINAMICS G120XA converter
Advertisement
Table of Contents
