Mounting The Shield Connection Kit; Mounting The Shield Connection Kit For The Control Unit; Fsh And Fsj - Siemens SINAMICS G120XA Operating Instructions Manual

Table 3-2
Drill pattern
3.3.3

Mounting the shield connection kit

Overview
We recommend that you mount the shield connection kits provided. The shield connection kit
makes it simpler to install the converter in compliance with EMC regulations and to provide
strength relief for the connected cables.

Mounting the shield connection kit for the Control Unit

Note
The shield connection kit for the Control Unit is available for converters FSD to FSG only.
Attach the shielding plate to the bottom of the Control Unit, and use a cross-tip screwdriver to
tighten the screw to fix it onto the converter.
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB

FSH and FSJ

Dimensions
A1
A2
A3
A4
A5
B
G1
G2
Ø
Fixings (bolts, wash‐
ers, nuts)
Tightening torque (Nm) 25
3.3 Mounting the converter
FSH FSJ
150 247
150 200
150 200
225 367
225 315
1444 1399
49 61
49 60
20 20
7 × M8 7 × M8
25
Mounting
49