Selecting The Number Of Drive Data Sets - Siemens SINAMICS G120XA Operating Instructions Manual

Selecting the number of drive data sets

Parameter p0180 defines the number of drive data sets (1 ... 4).
Parameter
p0010 = 0
p0010 = 15
p0180
Copying the drive data sets
Parameter
p0819[0]
p0819[1]
p0819[2] = 1
Parameters
Number
p0010
r0051
p0180
p0819[0 ... 2]
p0820[C]
p0821[C]
p0826[M]
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Name
Drive commissioning parameter filter
CO/BO: Drive data set DDS effective
Drive data set (DDS) number
Copy drive data set DDS
BI: Drive data set DDS selection, bit 0
BI: Drive data set DDS selection, bit 1
Motor changeover, motor number
Advanced commissioning
6.10 Switchover between different settings
Description
Drive commissioning: Ready
Drive commissioning: Data sets
Drive data set (DDS) number
Description
Source drive data set
Target drive data set
Starts the copy operation
Factory setting
1
-
1
0
0
0
0
347