Smc10 Sensor Module For Determining The Actual Motor Speed And The Rotor Position Angle (Option K46); Description - Siemens SINAMICS S150 Operating Instructions Manual

Electrical installation
4.9 Other connections
4.9.16 SMC10 Sensor Module for determining the actual motor speed and the rotor
position angle (option K46)
4.9.16.1

Description

The SMC10 Sensor Module is used for determining the actual motor speed and the rotor
position angle. The signals emitted by the resolver are converted here and made available to
the closed-loop controller via the DRIVE-CLiQ interface for evaluation purposes.
The following encoders can be connected to the SMC10 Sensor Module:
● Resolver 2 pole
● Multipole resolver
Figure 4-15
92
SMC10 Sensor Module
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A