Co/Bo: Closed-Loop Cascade Control Status Word / Csc_Ctrl Zsw; Closed-Loop Cascade Control Operating Hours / Csc_Ctrl Op_Hrs; Closed-Loop Cascade Control Max Time For Continuous Operation; Closed-Loop Cascade Control Operating Time Limit / Csc_Ctrl T_Max Op - Siemens SINAMICS G120XA Operating Instructions Manual

Parameters
7.3 Parameters
r2379.0...7

CO/BO: Closed-loop cascade control status word / Csc_ctrl ZSW

Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description: Displays the status word of the closed-loop cascade control
Bit field: Bit
00
01
02
03
04
05
06
07
p2380[0...2]

Closed-loop cascade control operating hours / Csc_ctrl op_hrs

Access level: 3
Can be changed: T, U
Unit group: -
Min:
0.0 [h]
Description: Displays the operating hours for the external motors.
The display can only be reset to zero.
Index: [0] = Motor 1
[1] = Motor 2
[2] = Motor 3
p2381 Closed-loop cascade control max time for continuous operation / Csc_ctrl t_max
Access level: 3
Can be changed: T, U
Unit group: -
Min:
0.1 [h]
Description: Time limit for the continuous operation of external motors.
Continuous operation is measured starting from when a motor is connected to the line voltage. It ends when a motor
is disconnected from the line.
p2382

Closed-loop cascade control operating time limit / Csc_ctrl t_max op

Access level: 3
Can be changed: T, U
Unit group: -
Min:
0.1 [h]
Description: Limit for the total operating time of external motors.
The total operating time of an external motor increases every time it is switched in.
630
Signal name
Start external motor 1
Start external motor 2
Start external motor 3
Switch-in motor
Switch-in/switch-out active
All motors active
Automatic replacement not possible
Alarm active
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Calculated: -
Scaling: -
Unit selection: -
Max:
340.28235E36 [h]
Calculated: -
Scaling: -
Unit selection: -
Max:
100000.0 [h]
Calculated: -
Scaling: -
Unit selection: -
Max:
100000.0 [h]
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
Data type: Unsigned32
Dynamic index: -
Function diagram: -
Factory setting:
-
0 signal FP
No -
No -
No -
No -
No -
No -
No -
No -
Data type: FloatingPoint32
Dynamic index: -
Function diagram: -
Factory setting:
0.0 [h]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: -
Factory setting:
24.0 [h]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: -
Factory setting:
24.0 [h]
SINAMICS G120XA converter