Replacing The Free Programmable Interface (Fpi); Removing The Fpi Board - Siemens SINAMICS G120XA Operating Instructions Manual

Corrective maintenance
10.2 Replacing spare parts
10.2.4.2

Replacing the free programmable interface (FPI)

Precondition
The converter power supply is switched off.
Required tools
Torque wrench for the following screws:
● TX-20
● TX-25
Function description

Removing the FPI board

1. Remove the 2 screws (torx 25) of the front cover.
2. Remove the front cover.
842
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB
SINAMICS G120XA converter