Atmf Enable - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF ENABLE

atmf enable
Overview This command manually enables (turns on) the AMF feature for the device being
configured.
Use the no variant of this command to disable (turn off) the AMF feature on the
member node.
Syntax atmf enable
no atmf enable
Default Once AMF is configured, the AMF feature starts automatically when the device
starts up.
Mode Global Configuration
Usage The device does not auto negotiate AMF domain specific settings such as the
Network Name. You should therefore, configure your device with any domain
specific (non default) settings before enabling AMF.
Examples To turn off AMF, use the command:
MyNode#
MyNode(config)#
To turn on AMF, use the command:
MyNode(config)#
This command returns the following display:
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
config terminal
no atmf enable
atmf enable
% Warning: The ATMF network config has been set to enable
% Save the config and restart the system for this change to take 
effect.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2054