Atmf Log-Verbose - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF LOG VERBOSE

atmf log-verbose

Overview This command limits the number of log messages displayed on the console or
permanently logged.
atmf log-verbose <1-3>
Syntax
no atmf log-verbose
Default The default log display is 3.
Usage This command is intended for use in large networks where verbose output can
make the console unusable for periods of time while nodes are joining and leaving.
Mode Global Configuration
Example To set the log-verbose to noise level 2, use the command:
node-1#
node-1(config)#
Validation show atmf
Command
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter
<1-3>
configure terminal
atmf log-verbose 2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The verbose limitation (3 = noisiest, 1 = quietest)
2059