Service-Policy Input - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
SERVICE POLICY INPUT

service-policy input

Overview Use this command to apply a policy-map to the input of an interface.
Use the no variant of this command to remove a policy-map and interface
association.
Syntax service-policy input <policy-map>
no service-policy input <policy-map>
Mode Interface Configuration
Usage This command can be applied to switch ports or static channel groups, but not to
dynamic (LACP) channel groups.
To apply a policy-map named pmap1 to interface port1.0.2, use the
Example
commands:
awplus#
awplus(config)#
awplus(config-if)#
613-50157-01 Rev C
Parameter
<policy-map>
configure terminal
interface port1.0.2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
Policy map name that will be applied to the input.
service-policy input pmap1
883