MLD
MLD S
C
AND
NOOPING
OMMANDS
6
-
IPV
MLD SSM
MAP ENABLE
ipv6 mld ssm-map enable
Overview
Use this command to enable the Source Specific Multicast (SSM) mapping feature
on the device.
Use the no variant of this command to disable the SSM mapping feature on the
device.
Syntax
ipv6 mld ssm-map enable
no ipv6 mld ssm-map enable
Mode
Global Configuration
Usage
This command enables the SSM mapping feature for group members in the
defined SSM range. Configure the group member and the SSM range using the
ipv6 mld ssm-map static
Example
This example shows how to enable the MLD SSM mapping feature on the device.
awplus#
awplus(config)#
Related
ipv6 mld ssm-map static
Commands
C613-50170-01 Rev B
command.
configure terminal
ipv6 mld ssm-map enable
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1274