Table of Contents
Advertisement
IP
6 C
V
OMMANDS
6
SHOW IPV
ROUTE
show ipv6 route
Overview
Use this command to display the IPv6 routing table for a protocol or from a
particular table.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 route
[connected|database|ospf|rip|static|summary|<ipv6-address>|
<ipv6-prefix/prefix-length>]
Mode
User Exec and Privileged Exec
Example
To display all IPv6 routes with all parameters turned on, use the following
command:
awplus#
To display all database entries for all IPv6 routes, use the following command:
awplus#
C613-50644-01 Rev B
Parameter
connected
database
ospf
rip
static
summary
<ipv6-address>
<ipv6-prefix>/<prefix-
length>
show ipv6 route
show ipv6 route database
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Displays only the routes learned from connected
interfaces.
Displays only the IPv6 routing information extracted
from the database.
Displays only the routes learned from OSPFv3.
Displays only the routes learned from RIPng.
Displays only the IPv6 static routes you have
configured.
Displays summary information from the IPv6 routing
table.
Displays the routes for the specified address in the
IPv6 routing table.
Displays only the routes for the specified IPv6 prefix.
"Getting Started
Guide.
939
Advertisement
Table of Contents
