Registration Roller Clutch (Clt1) - Toshiba e-STUDIO2006 Service Manual

(4) Take off the drawer feed clutch [3].
Notes:
When installing the drawer feed clutch [3],
engage the arm of the clutch with the rotation
stopper of the lower drive unit.
4.6.13

Registration roller clutch (CLT1)

(1) Take off the rear cover.
 P. 4-5 "4.1.9 Rear cover <20L/23L/25L/
20H/23H/25H>"
 P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(2) Disconnect 1 connector [1].
(3) Remove 1 clip [2] and take off the
registration roller clutch [3].
Notes:
When installing the registration roller clutch
[3], engage the arm of the clutch with the
rotation stopper of the lower drive unit.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-109
Fig. 4-110
[3]
Fig. 4-111
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 43
[3]
[1]
[2]
DISASSEMBLY AND REPLACEMENT
4