Adjustment Of Reverse Solenoid - Toshiba e-STUDIO520 Service Handbook

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO520:

Table of Contents

Adjustment of reverse solenoid

RADF Parts Layout

Large original exit solenoid

Refer to "16.13 Disassembly and Replacement [F] Solenoid" for the procedure to disassemble the sole-

[A] Large original exit roller release solenoid

Put the end faces of the bracket and solenoid

When the large original exit driven roller con-

tacts the large original exit roller, tighten the

screw B, move the screw A to position C,

temporarily fix it, and shift the solenoid down-

When the large original exit driven roller and

large original exit roller are disengaged,

tighten and fix the screws.

e-STUDIO520/523/600/603/720/723/850/853

Large original exit flapper

Large original exit roller release solenoid

Small original exit solenoid

Small original exit flapper

Large original exit driven roller

Large original exit roller

Ends faced-up

Show Quick Links

Table of Contents