Table of Contents
Advertisement
Preparation
Remove transport
fittings:
How to install the
process unit:
In order to transport or move the
machine the toner pack and the
process unit has to be removed.
TF 831/861
TOSHIBA
• Press the unlocking button and open the
housing of your fax machine.
• Remove the three cross-head screws which
secure the laser unit.
• Screw these screws into the three retainer
holes.
• Remove the remaining paper and plastic
fittings.
In order to prevent transport damage, the high-
quality process unit of your new fax machine is
delivered in special packaging to provide
additional protection. Please follow the
enclosed instructions. This is how to install the
unit:
Open the top cover
by pressing the release button.
Install the process unit...
by inserting the pins into the lateral guides and
then, by applying slight pressure, lower it into
the correct position.
A damaged drum will affect the copy
quality. Therefore: Never touch the
drum surface or expose the drum to
sunlight for more than three minutes.
5
GB
Preparation
Advertisement
Table of Contents
