Bypass Feed (Including Special Paper) - Toshiba E-Studio 202s Operator's Manual For Basic Function

BYPASS FEED (including special paper)

The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2"
to 8-1/2" x 14" (A6 to A4) and in the weight range of 15 lbs. to 34.5 lbs. (56g/m
2
128g/m ) can be used in this tray. (For paper weighing from 28 lbs. to 34.5 lbs.
2
(105g/m to128g/m
• The multi-bypass tray can hold maximum of 50 sheets of paper.
• The original image must be smaller than the paper or media for
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
14
2
), 8-1/2" x 11" (A4) is the maximum size.)
(Capacity will vary depending on the type of paper loaded.)
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
To close the multi-bypass tray, perform step
in the illustration and push the round projections at the right
2
of the tray until they click.
2
1
2
to
and then step
1