Configure System-Dump Timeout - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure system-dump timeout

configure system-dump timeout <seconds>

Configures an optional timeout for the dump transfer.

This command is available only on the "i" series switches.

Syntax Description

Specifies a time in seconds for the system dump timeout.

The default is 0.

Usage Guidelines

The minimum non-zero value is 120 seconds. The minimum recommended value is 480 seconds.

The following command configures the system dump timeout to 600 seconds:

configure system-dump timeout 600

This command was first available in ExtremeWare 6.2.2.

Platform Availability

This command is available on platforms with an Ethernet management port.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5