Enterasys N Standalone (NSA) Series Configuration Manual page 46

Startup and General Configuration Summary
Configuring the Line Editor
Key Sequence
p
P
u
~
Commands
The commands used to configure the line-editor are listed below and described in the associated
sections as shown.
•
show line-editor
•
set line-editor (Section
2-20 Matrix NSA Series Configuration Guide
vi Command
Put last deletion after the cursor
Put last deletion before the cursor
Undo last command
Toggle case, lower to upper or vice versa
(Section 2.1.7.1)
2.1.7.2)