Show System Login - Enterasys N Standalone (NSA) Series Configuration Manual

2.2.1.1

show system login

Use this command to display user login account information.
show system login
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to display login account information. In this case, device defaults have
not been changed:
Matrix(su)->show system login
Password history size: 0
Password aging
Username
admin
ro
rw
Table 2-4
: disabled
Access
super-user
read-only
read-write
provides an explanation of the command output.
General Configuration Command Set
Setting User Accounts and Passwords
State
enabled
enabled
enabled
Matrix NSA Series Configuration Guide 2-25