Set Spantree Adminedge - Enterasys Matrix E1 1G694-13 Configuration Manual

5.2.2.8

set spantree adminedge

Use this command to set the edge port administrative status on a Spanning Tree port.
set spantree adminedge port_string {true | false}
Syntax Description
port_string
true | false
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set front panel port 11 as an edge port:
Matrix>set spantree adminedge ge.0.11 true
Success setting admin edge to TRUE for port ge.0.3.
Reviewing and Setting Spanning Tree Port Parameters
Specifies the edge port. For a detailed description of
possible port_string values, refer to
Enables (true) or disables (false) the specified port as a
Spanning Tree edge port.
Matrix E1 Series (1G694-13) Configuration Guide
Spanning Tree Configuration
Section 4.1.2.
5-33