Enterasys N Standalone (NSA) Series Configuration Manual page 34

Startup and General Configuration Summary
Factory Default Settings
Table 2-2 Default Device Settings for Router Mode Operation (Continued)
Device Feature
IP-directed broadcasts
IP forward-protocol
IP interfaces
IRDP
MD5 authentication
(OSPF)
MTU size
OSPF
OSPF cost
OSPF network
OSPF priority
Passive interfaces
(RIP)
Proxy ARP
Receive interfaces
(RIP)
Retransmit delay
(OSPF)
Retransmit interval
(OSPF)
RIP receive version
RIP send version
RIP offset
2-8 Matrix NSA Series Configuration Guide
Default Setting
Disabled.
Enabled with no port specified.
Disabled with no IP addresses specified.
Disabled on all interfaces. When enabled, maximum advertisement
interval is set to 600 seconds, minimum advertisement interval is set
to 450 seconds, holdtime is set to 1800 seconds, and address
preference is set to 0.
Disabled with no password set.
Set to 1500 bytes on all interfaces.
Disabled.
Set to 10 for all interfaces.
None configured.
Set to 1.
None configured.
Enabled on all interfaces.
Enabled on all interfaces.
Set to 1 second.
Set to 5 seconds.
Set to accept both version 1 and version 2.
Set to version 1.
No value applied.