Enterasys N Standalone (NSA) Series Configuration Manual page 31

Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature
Spanning Tree edge
port delay
Spanning Tree forward
delay
Spanning Tree hello
interval
Spanning Tree ID
(SID)
Spanning Tree legacy
path cost
Spanning Tree
maximum aging time
Spanning Tree
point-to-point
Spanning Tree port
priority
Spanning Tree priority
Spanning Tree
topology change trap
suppression
Spanning Tree transmit
hold count
Spanning Tree version
Spanning Tree Loop
Protect
Spanning Tree Loop
Protect event threshold
Default Setting
Enabled.
Set to 15 seconds.
Set to 2 seconds.
Set to 0.
Disabled.
Set to 20 seconds.
Set to auto for all Spanning Tree ports.
All ports with bridge priority are set to 128 (medium priority).
Bridge priority is set to 32768.
Enabled.
Set to 3.
Set to mstp (Multiple Spanning Tree Protocol).
Disabled per port and per SID.
3 events.
Startup and General Configuration Summary
Matrix NSA Series Configuration Guide
Factory Default Settings
2-5