Honda ACCORD HYBRID 2005 Service Manual page 158

Cylinder Head
V a l v e , S p r i n g , a n d V a l v e S e a l I n s t a l l a t i o n
Special Tools Required
• Stem seal driver 07PAD-0010000
• Valve spring compressor attachment
07757-PJ1010A
1. Coat the valve stems w i t h new engine oil. Install
the valves in the valve guides.
2. Check that the valves m o v e up and d o w n smoothly.
3. Install the spring seats on the cylinder head.
4. Install the new valve seals (A) using the valve guide
seal installer (B).
NOTE: Exhaust valve seals (C) have a black spring
(D) and intake valve seals (E) have a w h i t e spring
(F). They are not interchangeable.
— I
?
[ —
\
[
—?
^
\
^
\
^
—
^
07PAD-0010000
NOTE: Use 5.5 m m side.
Install the valve spring and valve retainer. Place the
end of the valve spring w i t h closely w o u n d coils
t o w a r d the cylinder head.
Install the valve spring compressor attachment and
spring compressor. Compress the spring and
install the valve cotters.
07757-PJ1010A
Lightly tap the end of each valve stem t w o or three
times w i t h a plastic mallet (A) to ensure proper
seating of the valve and valve cotters. Tap the valve
stem only along its axis so y o u do not bend the
stem.
6-56