Honda ACCORD HYBRID 2005 Service Manual page 155

9. A p p l y a thin coat of clean engine oil to the outside
of the new valve guide. Install the guide f r o m the
camshaft side of the head; use the valve guide
driver to drive the guide to the specified installed
height (A) of the guide (B). If y o u have all 12 guides
to do, y o u may have to reheat the head.
Valve Guide Installed Height
Intake: 2 1 . 2 0 - 2 2 . 2 0 mm (0.835-0.874 in.)
Exhaust: 20.63—21.63 mm (0.812-0.852 in.)
10. Coat both the reamer and the valve guide w i t h
cutting oil.
11. Rotate the reamer clockwise the full length of the
valve guide bore.
12. Continue to rotate the reamer clockwise w h i l e
r e m o v i n g it f r o m the bore.
13. T h o r o u g h l y wash the guide in detergent and water
to remove any cutting residue.
14. Check the clearance w i t h a valve (see page 6-51).
Verify that a valve slides in the intake and exhaust
valve guides w i t h o u t exerting pressure.
6-53