Honda ACCORD HYBRID 2005 Service Manual page 124

Cylinder Head
T i m i n g B e l t I n s t a l l a t i o n ( c o n t ' d )
12. Install the front upper cover (A) and rear upper
cover (B).
B
13. Install the crankshaft pulley (see page 6-14).
14. Rotate the crankshaft pulley about five or six turns
clockwise so the t i m i n g belt positions itself on the
pulleys.
15. Turn the crankshaft pulley so its w h i t e mark (A)
lines up w i t h the pointer (B).
16. Check the camshaft pulley marks.
• If the camshaft pulley marks are at TDC, go to
step 17.
• If the camshaft pulley marks are not at TDC,
remove the t i m i n g belt and repeat steps 2
t h r o u g h 16.
FRONT C A M S H A F T P U L L E Y :
REAR C A M S H A F T PULLEY:
6-22