Honda ACCORD HYBRID 2005 Service Manual page 127

4. Set the camshaft pulleys to TDC by aligning the
TDC marks (A) on the camshaft pulleys w i t h the
pointers (B) on the back covers.
FRONT:
5. Remove the battery clamp bolt f r o m the back cover.
6. Remove the auto-tensioner.
7. A l i g n the holes on the rod and housing of the
auto-tensioner.
8. Use a hydraulic press to s l o w l y compress the auto-
tensioner. Insert a 2.0 m m (0.08 in.) pin through the
housing and the rod.
NOTE: The compression pressure should not
exceed 9,800 N (1,000 kgf, 2,200 Ibf).
(cont'd)
6-25