Honda ACCORD HYBRID 2005 Service Manual page 161

7. Remove all of the old liquid gasket f r o m the rocker
shaft holder and cylinder head.
8. A p p l y liquid g a s k e t P/N 08717-0004, 08718-0001,
08718-0003, or 08718-0009, evenly to the camshaft
holder mating surface of the cylinder head.
NOTE: Do not install the parts if 4 minutes or more
have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after r e m o v i n g the
old residue.
9. Set the rocker a r m assembly in place, and loosely
install the bolts. Make sure that the rocker arms are
properly positioned on the valve stems.
10. Tighten each bolt t w o turns at a t i m e in the
sequence s h o w n to ensure that the rockers do not
bind on the valves.
Specified Torque
8 x 1.25 mm: 22 N-m (2.2 kgf m, 16 Ibfft)
® ® ® ® ®
® © ® © ® ® ®
11. Install the injector base (A). Always use a n e w
gasket (B).
8 x 1.25 m m
22 N m
(2.2 kgf-m, 16 Ibfft)
(cont'd)
6-59