Secure Dhcp Commands - Dell Z9500 Command Reference Manual

-p
-v
<cr>
Dell#ssh 10.11.8.12 -c ?
3des-cbc
Dell#ssh 10.11.8.12 -m ?
hmac-sha1
hmac-sha1-96 Force ssh to use hmac-sha1-96 HMAC algorithm
hmac-md5
hmac-md5-96
Dell#ssh vrf vrf1 10.10.10.2 -l admin

Secure DHCP Commands

DHCP as defined by RFC 2131 provides no authentication or security mechanisms. Secure DHCP is a suite
of features that protects networks that use dynamic address allocation from spoofing and attacks.
clear ip dhcp snooping
Clear the DHCP binding table.
Z9500
Syntax
clear ip dhcp snooping binding
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Related show ip dhcp snooping
Commands
1676
SSH server port option (default 22)
SSH protocol version
Force ssh to use 3des-cbc encryption cipher
Force ssh to use hmac-sha1 HMAC algorithm
Force ssh to use hmac-md5 HMAC algorithm
Force ssh to use hmac-md5-96 HMAC algorithm
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
Security