Sftp Server Configuration Commands - H3C S5120-SI Series Command Reference Manual

aes128: Encryption algorithm aes128-cbc
des: Encryption algorithm des-cbc.
prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1-96.
md5: HMAC algorithm hmac-md5.
md5-96: HMAC algorithm hmac-md5-96.
sha1: HMAC algorithm hmac-sha1.
sha1-96: HMAC algorithm hmac-sha1-96.
prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange.
dh-group-exchange: Key exchange algorithm diffie-hellman-group-exchange-sha1.
dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.
dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.
prefer-stoc-cipher: Preferred encryption algorithm from server to client, defaulted to aes128.
prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1-96.
Description
Use the ssh2 command to establish a connection to an IPv4 SSH server and specify the public key
algorithm, the preferred key exchange algorithm, and the preferred encryption algorithms and preferred
HMAC algorithm between the client and server.
Note that when the client's authentication method is publickey, the client needs to get the local private
key for validation. As the publickey authentication includes RSA and DSA algorithms, you must specify
an algorithm (by using the identity-key keyword) in order to get the correct data for the local private key.
By default, the encryption algorithm is DSA.
Examples
# Log in to remote SSH2.0 server 10.214.50.51, using the following algorithms:
Preferred key exchange algorithm: DH-group1
Preferred encryption algorithm from server to client: AES128
Preferred HMAC algorithm from client to server: MD5
Preferred HMAC algorithm from server to client: SHA1-96.
<Sysname> ssh2 10.214.50.51 prefer-kex dh-group1 prefer-stoc-cipher aes128 prefer-ctos-hmac
md5 prefer-stoc-hmac sha1-96

SFTP Server Configuration Commands

sftp server enable
Syntax
sftp server enable
undo sftp server enable
View
System view
1-13