Clear Dot1X Statistics; Dot1X Initialize - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode Global Config
Related radius server host
Commands
tacacs-server host
users defaultlogin

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.
clear dot1x statistics {unit/slot/port | all}
Syntax
Mode Privileged Exec
clear radius statistics
This command is used to clear all RADIUS statistics.
clear radius statistics
Syntax
Mode Privileged Exec
dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the user
is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
dot1x defaultlogin listname
Syntax
Mode Global Config

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid if
the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
dot1x initialize unit/slot/port
Syntax
Mode Global Config
Command
Version 2.3
History
Configure the RADIUS authentication and accounting server.
Specify a TACACS+ server host.
Assign the authentication login list to use for non-configured users when
attempting to log in to the system.
Modified: Moved from Privileged Exec mode to Global Config mode.
Security Commands | 189