Hard Disk Drive Specifications; Removable Media Specifications; Storage And Media Devices; Mouse And Keyboard - Dell PowerEdge R330XL Planning, Installation And Service Manual

Honeywell server planning, installation and service
Table of Contents

Advertisement

Chapter 2 - Planning
2.7.1

Hard disk drive specifications

The Honeywell-based Dell R330XL has four hard disk drive bays. It uses four 300 GB SAS 2.5" hard
drives for RAID-5 (distributed parity). A 5th 300 GB 2.5" 15K RPM SAS HDD hot spare is available and
must be bought separately (P/N MZ-PCEH08). The following table provides the operating power
requirements for 300 GB hard drive.
Description
DC 5 volt Power (typ)
DC 12 volt Power (typ)
Other DC POWER
AC Power
The following table provides the maximum weight and dimensions for 300 GB hard drive.
Description
Height
Width
Depth
Weight
2.7.2

Removable media specifications

The Honeywell-based Dell R330XL server has one SATA DVD- RW drive. The SATA DVD-RW drive is
connected to the SATA connector on the motherboard. DC 5 volt power, 6.5 Watts is the operating
power requirement for DVD RW drive.
2.7.3

Storage and media devices

All mass storage devices are connected through SATA and PCIe. SATA DVDRW drive is connected
through the SATA connector on the motherboard. The RAID-5 SAS controller card is located on server
motherboard. The standard mass storage for this platform has 4 x 300 GB 2.5" 15K RPM SAS hard
drives, where drives 0, 1, 2 and 3 are in a RAID-5 configuration. The option of 5th 300 GB 2.5" 15K RPM
SAS HDD as a hot spare is available, you must purchase it separately (P/N MZ-PCEH08).
2.7.4

Mouse and keyboard

The USB mouse, a standard cursor control device and an USB standard PC keyboard are included with
the Dell R330XL server.
2.7.5

Monitor

The Honeywell-based Dell R330XL server supports industrial standard video format (typically
1024X768 at a refresh rate of 60Hz). You must use a multisync monitor along with the Dell R330XL
server platform operating system. The server can be configured only with a single screen option. In this
configuration, the monitor is connected to the AGP video controller output connector. Note that no touch
screen option is available for this server platform.
Requirement
2.25 w
13.44 Watts +10%, -8%
16 Watts Max, 4.1 Watts idle
N/A
Requirement
14.81 mm
70 mm
100.5 mm
0.201 kg
- 22 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents