User Interfaces: Idrac; User Interfaces: Idrac Gui - Dell PowerEdge XR4000w Installation And Service Manual

User interfaces: iDRAC

About this task
NOTE: A valid Service Tag must be programmed to the Witness and the CM must have backed up this tag as part of
the Witness Easy Restore (FRU recovery)
information. See Witness FRU deployment
The iDRAC of a compute sled connected to the same CM as a Witness node has several methods of interacting with or
collecting information from the Witness.
Witness node information, status, and power control interfaces are available through the following compute node interfaces:
● iDRAC GUI
● Redfish
● RACADM
Additional interfaces that provide some Witness data:
● CPLD
● IPMI

User interfaces: iDRAC GUI

About this task
The Witness landing page under System Overview contains the data fields and available options gathered from the CM for the
node.
For Witness power operation through the iDRAC GUI, please see
For Witness heartbeat operation through the iDRAC GUI, please see
The iDRAC GUI Witness Server page:
process. Without a valid Service Tag, the iDRAC will not report all Witness
for more information.
Witness power operations: iDRAC GUI.
Using the Witness heartbeat function
Initial system setup and configuration 19